This write up covers repairing the typical stuck tailgate that one or both sides will not unlatch.
The procedure should pretty much be the same regardless or year or even truck Mfg.
Skill: Anyone
Time: 10 mins
Tools:
Pliers
Small pry bar/glazing bar



It has two clips at the top and two tabs at the bottom, and may have some foam pads glued in to prevent rattling.

Clips: You will most likely need to use the medium size. The small size fits the latch rod but you can not get the rod through both of the rings on the clip.
Crimp the rod clips with pliers.
There is a left and right clip (crimmped)

Story’s Author

487 days on site
Vehicles:
1
Stories:
10