Feed Stories Exhaust

 Installed the Borla ATAK on my 2020 veloster N PP :) was pretty straight forward, only issue I ran into was aligning the tips, they’re still a bit uneven even after messing with the clamps and hangers for a while.

 It comes with the E-Cutout, Y-pipe with Band Clamps, Flange Gasket, Turndown Tip, and the switch and wiring. All of the metal parts are STAINLESS STEEL and It's the "No-Weld" Kit so tighten the clamps and GO!

 Just like I did with my '19, I painted the mufflers and visible pipes on my new '22 today. The mufflers are so visible on the Acadia, so this is a perfect sunny Saturday project.  Before: After:

 Just a quick post to say thank you to Magnaflow for taking care of my little muffler clamp problem . . .  I recently picked up a pair of nearly-new Magnaflow mufflers off e-bay; I had a problem with the install, couldn't get the driver side pipe to tighten down and broke the clamp . . . I called up Magnaflow to ask them what to do about it, and they sent me a new clamp free of charge,...

 NOVEL  FULL EXHAUST SYSTEM.  ▶︎EXHAUST MANIFOLD  ▶︎FRONT&CENTER MIXTURE PIPE  The rear muffler of novel was already installed,  The exhaust manifold was fabricated and installed.  The intermediate pipe was also replaced with a novel pipe, making the novel full exhaust.  My LC is the first in the world to install the NOVEL Racing LC exhaust manifold!...

 I just literally pulled the trigger on the SXTH Element downpipe. With their current markdown and Memorial Day sale, I got it for $445! Unreal... Got the titanium turbo studs, too. I also just got the Takeda 3in stainless midpipe to go with it. Gonna keep the OEM axle back for a while. My wife was generous enough to agree to let me get these, and after 27 years of marriage I've learned when...

 SLP High Flow Cats. BNIB  Was gonna do headers but unforseen circumstances stopped all performance mods. Inlet/outlet: 2.5"Body length: 8"Overall width: ~4.75"Overall length: 11.25"

 I upgraded the exhaust on my 2011 Camry SE 2.5 with the goal in mind of keeping it fairly docile, but with a mellow deep tone. I achieved this by running running a pair of Vibrant streetpower 2.5" black mufflers and a Streetpower round 2.5" muffler up front in place of the original resonator. I think it sounds great considering the factory exhaust is a single inlet dual exit setup, so I went...

 Saw TRD had black chrome tips, before I plunked down $90 bucks, I thought I try just painting them.  Just scuffed them with scotch bright, hit them with primer then gloss black paint,,  Going to let them dry good before reinstalling them,  Figure I got nothing to lose if they don't work out,don't really seem that visible to buy the trds?

 Installed this single exaust kit about 2 months ago and I love it. It's not too loud, it performs amazing and looks clean. First mandrel bent catback I've owned. $ 580 shipped in canada  

 I just installed these new mufflers I got from heeltoe they are the atlp v2 4 inch mufflers tips I was excited to see how they would look and tbh they look and sound great. the shop i had them installed at told me they had some trouble getting them installed but got it all done right.

 Yes a v6 will never sound like a v8, but for less than $50 its a good sound.And my clip actually sounds better than the majority of the youtubes i foundAll stock system

 Here is what I've come up with so far for a modified exhaust system. There are 2 mufflers on the Trailblazer. The first one which is right behind the catalytic is more of a resonator while the second one under the rear bumper is the main muffler. I decided to remove the rear muffler and put a y-pipe in it's place with 2 exhaust pipes leading up to the dual exhaust tips. I figured the huge re...

 Tanabe Medallion Axleback exhaust for 12-15 Civic SI. In good condition just a little dirty.

 Nightfall had just one piece of brightwork and it just bugged me when I looked at the rear of the Telly. Took some time today to change that. Purchased some spray paint, removed the exhaust and made it look better. The paint actually almost an exact match to the window trim. I think this just looks so much better.  THE PAINT:  Scuffed the exhaust with a drill with a scrubbing p...

 I had the muffler, resonator and catalytic convertor replaced since they were rotting away and i was starting to sound horribly loud

 What do you guys think looks wise? I used to have a cheap fart can on the car that started rusting so decided to change it out for a little more classy tip.

 What's the best way to rehab a junkyard muffler? Currently I have a very restrictive puny cylindrical muffler and teeny exhaust tip and I want it gone! I saw this OEM one and it doesn't look badly rusted, just a few spots here and there, and on the pipe, so I couldn't resist for around $35.00. On the other hand, it's been sitting outside for who knows how long.  I gave it my best effo...

 Yesterday, I installed the GM # 12499352 exhaust finishers on the car. Very pleased with their quality. These are advertised by some vendors as chromed parts, but are, in fact, polished stainless. I followed the instructions included with the parts and cut 3.5" off the stock pipes prior to installing.  The factory pipes looked like tiny drinking straws poking out below big notches in t...