Profile Menu

EGR Block Off Plate

Upgrades & DIY / Other DIY written by @Got_it_at_last Tonka (Jeep Wrangler 1989)
07.03.2017

I found this from "Route 66 Mods". They make EGR and Mechanical fuel pump block off plates for a lot of older motors.

I bought an EGR plate to get rid of some more useless "Stuff" under the hood Here's a few Pics of before and after. The below link is their homepage.

Pic 1 is what came with, Plate, a quality gasket, The plated cap screws were metric so I took a trip to lowes and got a couple grade 8 5/16-18 x 1/2"

Pic 2 is what I had under hood.

Pic 3 is what I ended up with after I lost the EGR, CTS, and a few more hoses.

L.M. If you see this I would like to know how you have your accelerator cable return springs routed. I have to come up with something a little more permanent as I used the old egr bolt to hold my return spring bracket, But Hey, That's another fix for another day.

Story’s Author

United States of America United States of America, Phoenix, Az
648 days on site
Vehicles:
2
Stories:
26
Experience:
5 years