I too have the broken clips on the flapper panel that covers the seat springs when the 3rd row is folded. Since these seem to break after some time (regardless of year model), it seems inevitable they will break again if replaced. I repaired mine with zip ties and a drill bit. I drilled a hole directly in front of the plastic tower that holds the clips in place, and since my towers were broken, drilled a 2nd hole in the middle of the tower piece. Running a zip tie from under the metal piece the clips attach to, through one of the holes I drilled and then back down through the other hole. The zip ties are very discreet, the panel stays in place, and if I need to remove the panel in the future, it only takes
snipping the zip ties to remove.




Story’s Author

450 days on site
Vehicles:
1
Stories:
10