Profile Menu

After Market Motor Mount Reviews

Upgrades & DIY / Other DIY written by @WeekendSoftRoading Honda CR-V 2004
09.09.2022

Hi, I needed to replace the passenger motor mount on my 04 CRV. I used the Beck/Arnley part and so far it has worked well. I've had it on for 100km and no unnecessary vibrations.

Front Motor Mount = SKP | Replaced on 11/01/21

Rear Transmission Mount = Anchor | Replaced on 2/15/22

Passenger Motor Mount = Beck / Arnley | Replaced on 09/01/22

Driver Side Transmission Mount = OEM? | I'm probably going to replace this with Beck Arnley

So far, these mounts have been holding and have not given me any vibrations.

UPDATE

Front Motor Mount = SKP | Replaced on 11/01/21 - Still good
Rear Transmission Mount = Anchor | Replaced on 2/15/22 - Absolutly destroyed
Passenger Motor Mount = Beck / Arnley | Replaced on 09/01/22 - Collapsed and replaced with OEM from Honda motor mount. Lesson learned, For any hydraulic, or active motor mounts I would suggest OEM.
Driver Side Transmission Mount = OEM? | I'm probably going to replace this with Beck Arnley - I'm going to buy OEM for this one

Rear Transmission Mount = Anchor | Replaced on 2/15/22 - Absolutely destroyed, I was getting mega vibrations upon accelerating in my 04 manual CRV, cruising, no vibrations.

Story’s Author

494 days on site
Vehicles:
1
Stories:
7