With only 250 miles on it, I just barely touched the edge of the garage entryway. A 1" strip of paint popped off and there were light clear coat scrapes below
The process was
1. Mask and drape the entire car
2. Feather the edge of the missing paint area
3. Lightly scuff the area with a progression of 800 and higher grits
4. Apply bulldog adhesion promoter (clear primer) and allow to dry
5. Apply the CWP white base coat blending out from the damaged area and allow to dry.
6. Lightly scuff the CWP and tack clean
7. Apply the pearlescence fading it out from the damage area and allow it to dry
8. Apply clear coat and allow to dry
Took about 2 1/2 hours right in my garage. There's a tiny area of orange peel and a couple of dirt specks but it will all be perfected with the buff out.
Here are a series of still shots through the process.
Before:

Draped, masked and feathered

Base white applied

Pearlescence applied

Clear coat applied and dry

Story’s Author
